FANDOM


back to http://scratchpad.wikia.com/wiki/Sasecurity

{{{ >Subject: Re: [MeshAPuser] My two mesh box saga :) There is no ethernet interface connected to this meshbox, however the IP
of eth0 is 192.168.1.2 which
is the same as a machine on my LAN?
Sounds like it could be the problem, depending on which machine responds first to the default gateway's ARP query for 192.168.1.2. Try changing this address in Wiana to another one on the same subnet that isn't currently in use.
No this is a red herring - if there is no interface connected, then it won't matter unless you are trying to access that ip from the meshbox.


10.51.13.180@meshbox:~# remotemanagement
Time cached
RUN

 % Total    % Received % Xferd  Average Speed          Time 

Curr Dload Upload Total Current Left
Speed
100 167 100 167 0 0 345 0 0:00:00 0:00:00
0:00:00
0
Download okay
Key exists
RUN COMPLETE
I've seen this a few times where there seems to be a lock between wiana and the meshbox. The way to get around it is to delete /etc/certs/local.*
Then, reboot and recheck in to wiana.
It should regenerate a key, and then check in again to download the wiana settings.



>>>is the same as a machine on my LAN?
Sounds like it could be the problem, depending on which machine responds first to the default gateway's ARP query for 192.168.1.2. Try changing this address in Wiana to another one on the same subnet that isn't currently in use.
No this is a red herring - if there is no interface connected, then it won't matter unless you are trying to access that ip from the meshbox.
}}}

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.